(888) 338-2867
Elmridge Manufactures of Industrial Jet Apparatus

Quality Products
Competitive Pricing
Fast Delivery!

Contact our American or Canadian Offices

+ 1-888-EDU-CTOR
Toll Free: (888) 338-2867

Jet Apparatus Solutions

PUMPING LIQUIDS

ELMRIDGE Liqui-Jet Eductors & Gas-Jet Siphons

ELMRIDGE Liqui-Jet Eductors

ELMRIDGE Liqui-Jet Eductors

Pumping Liquids Using Motive Liquids

Pumping – Injecting – Evacuating – Condensing – Lifting – Blending – Mixing – Agitating – Diluting – Dewatering – Draining

ELMRIDGE Liqui-Jet Eductors use water or other liquids under pressure as the Motive fluid, and operate on the venturi principle to pump other liquids or slurries. The high-velocity jet of liquid from the eductor nozzle entrains the suction liquid, creating a vacuum, and causing the suction liquid to be pumped. ‘TLL Series‘ Liqui-Jet Eductors are optimized to achieve the best combination of Suction Capacity and available Suction Lift using the least amount of Motive Liquid. ‘TLLM Series’ Liqui-Jet Eductors and ‘TLLT Series‘ Liqui-Jet Eductors combine higher Motive Liquid flowrates and somewhat lower Suction capacities with higher Discharge heads. Other models are available from stock with different operating characteristics. Liqui-Jet eductors are typically available from stock in PVC, CPVC, PVDF, Polypropylene, Bronze/Brass, Cast Iron/Steel, 316L Stainless Steel, and all Carbon Steel Construction. Other materials are available upon request. Threaded, Flanged, or Sanitary connections are standard.

ELMRIDGE Liqui-Jet Eductors and Gas-Jet Siphons are Self-Priming and have no moving parts!

See the ELMRIDGE ‘ME Series’ Liqui-Jet Mixing Eductor datasheet for pumping liquids and suspensions or slurries with equipment mounted inside the process vessel.
ELMRIDGE Liqui-Jet Eductors are an efficient, economical means of pumping liquids of slurries.
ELMRIDGE Gas-Jet Siphons are typically used for pumping liquids or slurries when Motive Steam is available.

ELMRIDGE Gas-Jet Siphons

ELMRIDGE Gas-Jet Siphons

Pumping Liquids Using Motive Steam / Compressed Gas

Pumping – Condensing – Lifting – Heating – Mixing – Diluting – Dewatering – Draining

ELMRIDGE Gas-Jet Siphons use primarily steam as the Motive fluid, and operate on the venturi principle to pump liquids or slurries. Steam is expanded through a nozzle at high velocity, creating a vacuum, causing the suction liquid to be pumped. TGL SERIES GAS-JET SIPHONS are optimized to achieve the best combination of Suction Capacity and available Suction Lift using the least amount of Motive Steam. Gas-Jet Siphons are typically available from stock in Bronze/Brass, Cast Iron/Steel, 316L Stainless Steel, and all Carbon Steel construction. Other materials are available upon request. Threaded or Flanged connections are standard.

Gas-Jet Siphons can also be used with compressed non-condensable gases (ie. Compressed air), to pump relatively very small volumes of liquids or slurries. Contact our technical staff for details.

American Offices

ELMRIDGE Inc.
39111 West Six Mile Road
Livonia, MI 48152
ElmridgeJetApparatus.com

1-888-EDUCTOR (338-2867)
Phone: 416-749-7730
Fax: 416-749-2550

Canadian Offices

ELMRIDGE Engineering Inc.
15 Allaura Boulevard
Aurora, Ontario L4G 3N2
ElmridgeJetApparatus.com

1-888-EDUCTOR (338-2867)
Phone: 905-726-7730
Fax: 905-726-2500

Contact Us Today